Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt
Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt

Digital Hour Meter Gauge for Motorcycle ATV Marine Boat Yama Ski Dirt

BG-US-921480-Automobiles-Motorcycles

$15.99 $23.98
  • Free Shipping
  • Easy Returns
  • Secure Payment

Description

Digital Hour Meter Gauge For Motorcycle Atv Snowmobile Marine Boat Yama Ski Dirt

features:

1. Waterproof Design

2. Built-in Battery Power Supply, Safe And Reliable

3. Sensor Design, Simply Tied Onto The Spark Plug Cable Can Operate

4. Track The Service Life Of Your Vehicle-oil Changes,valve,adjustments,spark Plugs,etc.

5. Easy Installation-peel & Stick, No Wiring Necessary,or Attach With Enclosed Hardware

6. Works On Any Gas Engine

7. Records And Displays To 9,999.9 Hours.

8. Hour Glass Symbol Appears And Flashes On / Off To Indicate Counting Time.

9. Automatic Roll Over

10. 1.0inch Lcd Screen Display

11. Waterproof Material

specification:

resolution: 0.1 Hour

type: Electronic Gadgets

temperature: -30'? ~ 85?

color: Blue/yellow/blue/red/orange

dimensions: 2.13 In X 1.46 In X 0.59 In (5.4 Cm X 3.7 Cm X 1.5 Cm)

installation:

1.wrap The Included Pick-up Wire Around The Spark Plug Wire Five Times. Start Wrapping The

pick-up Wire About 4cm From The End Of Spark Plug Boot. Use The Included Zip Tie To Secure

the Pick-up Wire Wrapping As Shown In The Photo Right.

2.before Continuing The Installation, Insert The Pick-up Wire Into The Rear Of The Meter. Start The

motor To Make Sure The Meter Is Picking Up The Ignition Signal. If It Is, This Will Activate The Timer

on The Meter And The Icon On The Left Of The Lcd Will Flash. You'll Have To Wait At Least 6 Minutes

to Increase The Timer Display?1/10th Of An Hour). If It Is Not Picking Up The Ignition Signal, Slide The

Pick-up Wrap Closer To The Spark Plug Boot.

3.1f The Meter Is Successfully Picking Up The Spark Signal, Run And Zip Tie The Pick-up Along One Of

the Throttle Cables. Make Sure The Pick-up Wire Can Not Make Contact With The Engine. Also, Make

sure You Leave Enough (about 8 Cm) So Removing The Spark Plug Wire Is Possible. Keep In Mind The

general Location Of Final Mounting Location On The Frame Spare.

4.securing Method:

a. Drilling Into Your Frame With 2.5mm Socket, Then Secure It To The Frame Coming With Two Pick-up Screws.

b. Using Padded Double-sided Tape On The Backside Of The Meter And Secured It To The Frame Spar With Zip Ties.

that's All There Is To The Installation. Now You're Set To Accurately Track Your Maintenance. Don’t Forget To Record

the Metered Time When Performing Maintenance.

compatibility:

all Motorcycle Models (anything With A Spark Plug Really Should Work)

tools Required: 2.smm Socket To Remove Shroud, Wire Cutters.

packing Included:

1 X Hour Meter

1 X Cable (110cm)

2 X Screws

SHIPPING

Free Worldwide Shipping

Secure Payments